------------
INTRODUCTION
------------
Following is a list of coverages contained in this workspace used to generate
the included EPS file. Please note that not all features listed in the features 
list are present in the indicated coverage. This is merely a list of mappable 
features for which symbology has been developed. Use the Arc/Info frequency 
command to determine which items are present in a given coverage.

-------------------------------------------------
CONTACTS COVERAGE (arcs, annotation and polygons)
-------------------------------------------------
Contains polygon boundaries between mappable geologic units and polygon codes
for the mappable geologic units. Arcs are coded to represent certainty of 
contact location. Annotation is added to indicate geologic units. Annotation 
size is scaled to plot as an 8 point Helvetica font when plotted at the 
indicated map scale. Special characters are used to represent specific geologic 
formation ages (see note below).

** contacts.aat **
(arccode 5 6 c) --> contact arcs codes
con = contact
acon = approximately located contact
icon = inferred contact
ccon = concealed contact
fcon = fault contact
bord = map border

** contacts.pat **
(polycode 6 7 c) --> geologic unit polygon codes =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
**NOTE** Special characters are used to indicate Cambrian, Pennsylvanian and 
Triassic rocks. In order to display these characters special fonts should be
used with the following equivalent characters:
^ = Cambrian
& = Pennsylvanian
@ = Triassic

md  = Tailings, mine dumps, and slag piles (Holocene)
Qs  = Surficial sedimentary deposits (Pleistocene and Holocene)
Ts  = Sedimentary deposits and rocks (Eocene through Pliocene)
Trv = Rhyolitic volcanic rocks (Eocene through Miocene)
Tab = Andesitic and basaltic rocks (Eocene and Oligocene)
Tgd = Granodioritic rocks (Eocene)
Tlc = Lowland Creek Volcanics (Eocene)
TKab= Andesitic and basaltic volcanic rocks (Tertiary or Cretaceous)
TKg = Granitic rocks (Tertiary or Cretaceous)
TKgd= Granodioritic rocks (Tertiary or Cretaceous)
TKgb= Gabbroic rocks (Tertiary or Cretaceous)
TKa = Alkalic rocks (Tertiary or Cretaceous)
Ka  = Aplitic rocks (Cretaceous)
Kg  = Granitic rocks (Cretaceous)
Kgd = Granodioritic rocks (Cretaceous)
Kmd = Monzodioritic rocks (Cretaceous)
Kgb = Gabbroic rocks (Cretaceous)
Kl  = Latite sill (Cretaceous)
Kem = Elkhorn Mountains Volcanics (Cretaceous)
KJs = Sedimentary rocks (Cretaceous and Jurassic)
PDs = Sedimentary rocks (Permian through Devonian)
^s  = Sedimentary rocks (Cambrian)
ZYg = Gabbroic rocks (Middle or Late Proterozoic)
Ypi = Pilcher Quartzite (Middle Proterozoic)
Ygr = Garnet Range Formation (Middle Proterozoic)
Ym  = McNamara Formation (Middle Proterozoic)
Ybo = Bonner Quartzite (Middle Proterozoic)
Yms = Mount Shields Formation (Middle Proterozoic)
Yss = Snowslip and Shepard Formations (Middle Proterozoic)
Ysh = Shepard Formation (Middle Proterozoic)
Ysn = Snowslip Formation (Middle Proterozoic)
Yc  = Middle Belt carbonate (Middle Proterozoic)
Ye  = Empire Formation (Middle Proterozoic)
Ys  = Spokane Formation (Middle Proterozoic)
Yg  = Greyson Formation (Middle Proterozoic)
Yq  = Quartzite of the Belt Supergroup (Middle Proterozoic)
Ymb = Metamorphosed rocks of the Belt Supergroup (Middle Proterozoic)
W   = Water
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-                                             
----------------------------------------
FAULTS COVERAGE (arcs and point markers)
----------------------------------------
Contains mapped faults. Arcs are codes to represent specific fault types and 
certainty of surface location. Points denote spacial markers on faults (i.e., 
ball & bar and strike-slip arrows). Strike value rotates the point marker 
appropriately for the trend of the fault trace at the location of the point 
marker.

** faults.aat **
(arccode 5 6 c) --> fault arc code
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
**NOTE** For reverse faults, thrust faults, and detachment faults, the teeth
are on the LEFT-HAND side of the arc based on the FNODE and the TNODE.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
faul = fault
afaul = approxiamtely located fault
ifaul = inferred fault
cfaul = concealed fault
rev = reverse fault
arev = approxiamtely located reverse fault
irev = inferred reverse fault
crev = concealed reverse fault
tst = thrust fault
atst = approxiamtely located thrust fault
itst = inferred thrust fault
ctst = concealed thrust fault
det = detachment fault
adet = approxiamtely located detachment fault
idet = inferred detachment fault
cdet = concealed detachment fault

** faults.pat ** --> fault point marker code
(ftype 4 5 c)
ball = ball and bar on downthrown block
rlss = right-lateral strike-slip fault
llss = left-lateral strike-slip fault

(strike 3 4 i) -- strike of fault at fault marker point location

---------------------------------------
FOLDS COVERAGE (arcs and point markers)
---------------------------------------
Contains arcs representing fold axial traces. Arcs are coded to represent 
certainty of location of axial trace. Points denote markers to indicate fold
type (i.e., anticline, syncline, etc.). Strike value rotates the point marker 
appropriately for the trend of the fold axial trace at the location of the point marker.

** folds.aat ** 
(arccode 5 6 c) --> fold arc code
fold = fold axis
afold = approximately located fold axis
ifold = inferred fold axis
cfold = concealed fold axis

** folds.pat **
(ftype 4 5 c) --> fold point marker code
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
**NOTE** For overturned anticlines, overturned synclines and monoclines
the beds dip to the RIGHT while looking in the strike direction. For plunge
direction, the strike is in the direction of axial plunge.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
anti = anticline
syn = syncline
mono = monocline
otan = overturned anticline
otsy = overturned syncline
dome = dome
basi = basin
plun = plunge direction

(strike 3 4 i) --> strike of fold axis at fold marker point location

-------------------------------
GEOL_REGIONS COVERAGE (regions)
-------------------------------
Contains polygons for specific geologic features not included in the CONTACTS
coverage. Specific geologic features are separated into different REGIONS
subclasses. Subclass names indicate the geologic feature.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
**NOTE** Attribute items not needed for geol_regions.pat or geol_regions.aat.
Use regionlines and regionshades to plot these features.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
geol_regions.patCLINKER = regions of clinker
geol_regions.patHYDRO = regions with hydrothermal alteration
geol_regions.patPALEOSOL = regions of paleosol
geol_regions.patSILICIFIED = regions with silicification

--------------------------
GEOL_LINES COVERAGE (arcs)
--------------------------
Contains arcs for specific geologic features not includedin the CONTACTS, 
FAULTS, or FOLDS coverage. Arcs are coded to indicate the type of geological
line feature.

** geology_lines.aat **
(arccode 5 6 c)
silcr = silcrete bed
vein = veins
dike = dikes
sill = sills
scarp = scarps
glax = glacial extent
glam = glacial meltwater channel scarp
mine = open pit mine

------------------------------------
GEOL_POINTS COVERAGE (point markers)
------------------------------------
Contains geologic point features not included in other coverages. Point code
indicates the type of feature.
** geology_points.pat **
(ptcode 5 6 c)
brecc (sedimentary breccia)
